Tools/Maintenance

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.

The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes.

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

- Special cable cutter for SIS type cables and housings - Neat, clean cut - Features a cable ferrule plier - Superior quality, 1095 carbon steel

Wera Micro screwdriver set for precision mechanical work. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below, making time-consuming grip adjustments unnecessary. Store and transport in the belt pouch so the tool is always at hand. - Kraftform Micro set in a belt pouch - Kraftform Micro handle for fast and ergonomic working - The Wera Black Point tip offers an exact fit and corrosion protection - Holding function for Torx screws - "Take-it-easy" tool finder: color coding according to profile and size

Park Tool's TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK. The TS-RK includes the following: • 1 - #211S Main Shaft • 4 - #749-1 Bearing Washer • 2 - #748-1 Needle Bearing • 2 - #209-2 Shaft Adjusting Collar • 1 - #229 Spring • 4 - #232-2 Split Nylon Bushing • 2 - #235-2 Split Nylon Bushing • 1 - #222-SR Right Caliper Spring • 1 - #222-SL Left Caliper Spring • 1 - Set of Installation and Adjustment Instructions

Securely holds the TS-4 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4 was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Stand Mount mounts to any Park Tool Professional Shop Stand (all versions of PRS-2, -3, -4, and -33) - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

Wera compact tool with multi-component Kraftform handle for high working speeds and ergonomic screwdriving. Integrated bit magazine in the handle. Includes ratchet: fine-pitched for small return angle, switchover ring (right, fixed, left), maximum torque of up to 50 Nm; hexagonal blade with 1/4" hexagon socket take-up, stainless sleeve, strong magnet. - Kraftform Kompakt with ratchet function for high working speeds - Kraftform with anti-roll feature, multi-component, integrated magazine - Fine-pitched teeth for small return angle; switchover ring (right, fixed, left) - Maximum torque of up to 50 Newton meters

Zyklop Mini 2 is for the direct take-up of special Wera Zyklop sockets. Offers rapid screwdriving even in confined working spaces, the Zyklop Mini 2 is the preferred choice whenever fastening with a power tool or conventional hand tool is impossible due to a lack of space. - Direct attachment of special Zyklop sockets - Small return angle of 6 degrees for precise working - Simple left/right switchover - Ideal for confined working situations

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable. Includes the following magnetic 1/4" bits: - 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex - T25 Torx-compatible - #2 Philips cross tip - Bit holder includes empty spaces for 2 extra bits

30 function, pro-quality, precision mini-tool with integrated tubeless tire repair tools. Removable chain tool with built-in master link tool for removing and reinstalling master link type chains stores securely within the Mini PT30 body. Forged alloy body. Perfect for any road or trailside repair. - Functions: 30 - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Weight: 169g / 5.96oz - Size: 7.4 x 4 x 1.9cm / 2.9" x 1.6" x 0.7" - Additional Features: Knife blade & plug insertion tool lock, extendable for leverage, secondary chain link fence, chain pin breaker, and master link storage compartment - Includes neoprene bag Tools: - 2L / 2.5 / 3 / 4 / 5 / 6 / 8mm Allen wrenches - 10mm hex socket - T10 / T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, chain hook, CrMo master link tool (compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains) - #2 Phillips / flat head screwdrivers - Tire reamer, plug insertion tool - Serrated knife/saw, disc spacer

This one's for the speed freaks. Say hello to the world's fastest race lube – Ludicrous AF! In development for over three years and perfected throughout the 2020 Grand Tour season, with multiple podiums and an overall win at the Giro d'Italia. Stripped back to the bare essentials–no coloring, no fragrance, no additional corrosion inhibitor, just a unique blend of environmentally friendly raw ingredients designed to minimize chain friction and wear, while maximizing performance in all conditions. - Ultra-low coefficient of friction - Class-leading low wear on chain components - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Continues to improve with chain run-in due to continued surface improvement at a molecular level - Petroleum-free formula, environmentally friendly ingredients and biodegradable - Works in temperatures down to -20°C

- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications

Securely holds any of Park's TS-2, TS-2.2, and TS-2.2P Professional Wheel Truing Stands and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

Application-specific mixture of workshop screwdrivers with normal long blade and especially small Stubby screwdrivers with short blade for hard-to-reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. - Short compact Stubby screwdriver for working in confined spaces - Laser-tip screwdriver with long blade - Ergonomic 2-component Kraftform handle for precise work - Hexagonal anti-roll feature against rolling away - Take-it-easy tool finder: color coding according to profile and size

Compact, easy-to-use-and-read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2 – 6 Nm.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    

The DC-2 is a vernier caliper for accurately measuring seat posts, head tubes, bearings, spoke diameters, and other components, featuring a large LCD screen for accuracy and ease of use. The tool’s ability to measure in metric and inches in external, internal, depth, and stepped dimensions make it an indispensable shop tool. - Range: 150 mm | 6" - Resolution: 0.01 mm | 0.0005" - Accuracy: +/- 0.02 mm | 0.001" - Repeatability: +/- 0.01 mm | 0.0005" - Measures external, internal, depth, and stepped dimensions - Uses LR44 batteries

- 7-piece screwdriver set with Kraftform Plus handle - Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. - Includes tools with Lasertip blades: The tip clings to the screw head and prevents it slipping out. - Take it easy tool finder with color coding and size stamping - The anti-roll protection - Include: Scewdriver (PH 1,2) (PZ 2) (TX 15,20,25) (Flat 0.8x4mm) - Textile Case

"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings: • Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose • Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS • Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm • Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire • Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes Also included: • Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing • Guide magnet — routes guide cables through the frame from the outside"

High-quality L-key set out of stainless steel for hexagon socket screws by Wera. The Hex-Plus profile offers a greater contact surface in the head of the screw; the notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. Comes with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. - Stainless steel prevents the transfer of extraneous rust: fasten stainless screws with stainless tools - Hex-Plus allows socket head screws to live longer - With Take-it-easy tool finder: color coding by size - Wear-resistant clip material for enhanced durability - Color-coded, easy-to-grip plastic sleeve, even at low temperatures - Comes in an almost wear-free L-key clip fastener

Wera offers the Bicycle Set 1, an assortment of tools that is very mobile thanks to its compact and design-oriented textile folding bag, and offers solutions for the most common screwdriving situations when working with bicycles. The sturdy bag contains the bit ratchet Zyklop Mini 1 and 10 bits with all the benefits of Wera-Bit technology, specially adapted to the most common screw connections on a bicycle. - Compact 12-piece wrench set for bicycle applications, also for mobile use - Practical range for DIY assembly work and repairs - Suitable tools for the most common bolt profiles on road bikes, mountain bikes and e-bikes - Robust, surface-friendly, compact textile folding bag - Set includes bit ratchet Zyklop Mini 1 and extension