Other

- Protects high risk areas from rock chips, wear & scratches - Designed around mountain bike geometry - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Frame coverage ~60%. Includes toptube, downtube, 4 stays, seat tube, and extra pieces. - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed - Made in Canada

- Protects high risk areas of the fork from rock chips, wear & scratches - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - Fork coverage ~60%. Includes crowns, lowers, and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Protects key areas from cable rub, rock chips, wear & scratches - Fits all makes, models and sizes - Designed around mountain bike geometry - Frame coverage ~30%. Includes toptube, downtube, 4 stays and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

Full-sized, rugged camp-ready utensils that easily fit into gloved hands. - Full sized - Includes: Fork, spoon, and knife - BPA-free - Serrated knife makes short work of steak, squash, or a favorite spread - Weight: 1.3oz - Dimensions: 7.9 x 1.7 x 1.3"

Bar Tape Clips are simple little plastic replacements to the dreaded electrical tape that's often used to finish off wrapped bars. These clips work with one or two internal cables, either on oversized 31.8 bars (where it tapers down to 28.6) or old-school 28.6 bars.

Cannondale Headshok Adaptor for the SKS Shockboard Fender

Clear stick on chainstay and frame protectors.

Perfect for keeping cables and cords tucked away or for attaching to your bike frame whatever you deem attachable, these handy Problem Solvers Zip Ties come packed 100 per box. - 2.5 x 200mm - Heavy-duty nylon material - 100 count per box

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Give your bike the ol' razzle dazzle. The perfect accessory for fun and safety. Chose from three vibrant colors paired with reflective elements. - Fits the end of a standard grip (handlebar end cap needs to be removed) - Reflective elements for added safety

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white. Dimensions: 36 x 4.5-inches

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

KL-BOX bracket with two velcro mounting straps. - Serfas KL-BOX Lock Mounting Bracket - (2) Velcro Mounting Straps

Electra's Aluminum Bolt-On Kickstand makes it easy to park your bike upright.

- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA

Sip your morning coffee out of this Q-branded ceramic mug. - Volume: 12 oz

Converts quill style forks to use threadless stems.

Made of aluminum and embossed with the “Bicycle Tools” label. Dimensions: 26.5 x 6.5-inches

Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Designed for bartenders, homebrewers, and the kind folks who pour our delicious cold-brew coffee, the Problem Solvers Pedal to Tap Handle Adapter allows thirsty cycling enthusiasts to top their favorite tap handle with the bicycle pedal of their choice. - Works with standard 3/8" tap handles and 9/16" pedal spindles - Two configurations, both labeled with "L" or "R", for compatibility with left and right-hand-threaded pedals - Aluminum construction - 20 TPI

The Problem Solvers Sketchbook and Bench Reference Guide exists because writing things down is important. Sketch out new ideas, record findings, workarounds, geometries, spoke lengths, never-try-it-agains, or just to doodle during that boring meeting at work. - DIY Reference and/or User Manual - Engineer-ruled for oddball geometric sketching - Includes semi-useful tables and tools