Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Profile Design Aris Road Stem (+/-25-degree rise)
$49.99
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Profile Design H2O Quill Stem
$49.99
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
Promax Impact Mini Stem
$49.99
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
Race Face Aeffect 35 Stem
$49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Race Face Respond
$49.99
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
Specialized Comp Multi Stem
$50.00
Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Profile Design 1/Seventeen
$57.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
Profile Design 1/ZeroSeven
$57.99
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
Fizik Cyrano R5 Stem
$59.99
Cyrano Stem R5: The fi'zi:k stem is designed to form the cockpit when fitted with the Cyrano Handlebar and Seatpost. It is made using a combination of Anticorodal Aluminium. Anticordal is a 6061-series aluminum with a high strength-to-density ratio, this material has the highest level of stiffness. Anticordal also has good fatigue resistance, particularly important in cockpits. The Cyrano Stem is available in a choice of six different lengths ranging from 80mm to 130mm. When combined with the correct choice of Cyrano handlebars, specified according to the Spine Concept system, you can ensure high-performance, long-lasting cockpit with the perfect fit. - Body Material: Aluminium-Anticorodal - Head Material: Aluminium-Anticorodal - Bolts: Stainless Steel - Diameter: 31.8mm - Angle: 7° - Weight: 152 grams (110 mm - 7°)
Pro PLT Stem
$59.99
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Race Face Aeffect R 35 Stem
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Race Face Chester DM 35
$59.99
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
Radio Axis Stem
$59.99
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.
Specialized Trail Stem
$60.00
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
FSA Gossamer Stem
$62.99
Basic, clean, and dependable performance – that’s FSA's Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer’s shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - Stack Height: 40mm - Weight: 154g
TruVativ Holzfeller Stem
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Easton EA70 Stem
$64.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Specialized Turbo Vado Stem w/Display & Light Mount
$64.99
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Specialized S-Works SL Stem w/Expander Plug (6-degree)
$65.00
Specialized's S-Works SL Stem is a lightweight stem that comes in six sizes to dial in the perfect fit on your road or mountain bike. With a 6-degree rise, it's 3D forged and CNC'd from 7075 aluminum for excellent lightness and strength. The S-Works SL Stem also boasts titanium hardware, and an expander plug for carbon steerer tubes.
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
TruVativ Descendant Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Promax Impact Stem
$69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax S-35 Stem
$69.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
3T Apto Pro
$70.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
TruVativ Descendant Direct Mount Stem
$75.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design