The Crank Brothers Cobalt 11 Handlebar is the perfect weight-saving, stiffness-enhancing upgrade for your prized bike! It's constructed from high modulus carbon for an unreal stiffness-to-weight ratio and the choice of 8 or 15mm of rise lets you find the ideal position for climbing up and ripping down.
Keep your all-mountain rig light and prime for shredding with Crank Brothers' Iodine 11 Riser Bar! Thanks to its high-modulus carbon construction, it's the perfect weight-saving, stiffness-enhancing upgrade for your trail-dominating machine. You'll also love its 30mm of rise that puts you in the ideal position for climbing up and ripping back down. And, did you check out those graphics? Classy.
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
FSA's SL-K handlebar is the ultimate mix of lightweight and strong, for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both carbon and aluminum construction. The carbon helps keep the vibration to a minimum, while the aluminum core maintains its strength. The SL-K handlebar maintains XC weight with Enduro strength. With both medium 18mm rise or flat options and a solid 740mm width, this bar will help with a perfect fit, great control, and utmost performance for even the most demanding rider in mind. - Weight: 235g - Width: 740mm - Material: Carbon - Upsweep: 4° - Backsweep: 9°
Put the final touch on your lightweight super bike with FSA's K-Force Low Riser bar. A mix of carbon fiber and Kevlar makes this bar feathery light and incredibly durable for tough off-road use. Plus, the brake lever, bar-end and stem clamp zones have been reinforced for added strength.
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 173g - 740mm wide - 31.8mm clamp diameter - 15mm rise
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 160g - Di2 compatible with internal wire routing - 720mm wide - 31.8mm clamp diameter - 5mm rise
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
- Butted 6061 aluminum - Double butted 6061 alloy - 35mm rise - 9 degree sweep - Width: 670mm - 25.4mm center section
Ritchey's Comp Rizer Handlebar - Double butted 6061 alloy - Rise: 20mm - 9 degree sweep - Width: 740mm - 31.8mm O/S center section - Finish: BB Black - Weight: 380g
A shallow rise and gentle sweep are the key attributes of the Comp Rizer bar. Extra wide grip area allows plenty of room for all components and remotes of choice. - Double-butted 6061 alloy - Rise: 20mm - 9-degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Finish: BB black - Weight: 380g
Same proven Ritchey quality, performance and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. Extra wide grip area allows plenty of room for all components and remotes of choice. - 20mm or 30mm rise - Width: 760mm widths - Blatte finish - 276g
Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology in a 15mm rise bar, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 15mm rise - 9-degree sweep - Width: 740mm - 31.8mm center section - Matte UD carbon finish - Weight: 180g
Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g
Page 1 of 3 Next page