Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 300 mounts to 2-hole Cervelo seat posts and the new Quintana Roo PR6. The system includes a Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Complete the look of your Super Record-equipped dream ride with Campagnolo's 18-gram Record Water Bottle Holder. This monocoque carbon marvel holds your bottle in the ideal position for quick and easy entry/exit. It's sleek, it's dreamy, it's 100% Campy.
XLAB's Torpedo System 100 is the cutting-edge of aerodynamics, combined with ultra-light design and state-of-the-art ergonomics... your next hydration system is here! The Torpedo System 100 is a low-cost refillable BTA system. You can fold the straw with 2 different positions and have your computer in front of the system in easy, line of sight to keep your focus on the road ahead. The system includes XLAB's aluminum Torpedo Mini Mount, Vee Bottle Cage, Aero Computer Mount, 2 Lids, Straw and Bite Valve and all necessary hardware. It's vertically and horizontally adjustable and aerodynamically, it's invisible!
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
The Starter Kit has all of the basic necessities required to get you out riding prepared and safely. It contains two bottle cages, a durable, efficient pump, tire levers, and a water-resistant saddle bag to house it all. - Mini Wedgie saddle bag provides 48.5 cu. in. of easily accessible storage—ample room to house tire levers, small pumps, and basic nutrition. It's also treated to be water-resistant, and features an internal neoprene sleeve to safely hold tools. - Two Roll Cage bottle cages are light, dependable, and easy on the eyes, making them the perfect solution to your hydration needs. - Air Tool Flex Road pump is lightweight, durable, and features a twin Presta and Schrader valve on the T-Head. It's hose has built-in flex to alleviate stress on the tube's valve, while its inverted barrel design is efficient and allows for easy, high-volume pumping.
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
11g is no joke, in fact it’s the lightest commercial cage available. But this cage isn’t just about weight, its sleek design makes it a must-have. - 100% 3k Carbon - LockTight Hoop - Hand-painted - Road and MTB approved - High-end and durable
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
The ultimate starter combo kit! • Medium-sized saddle bag • Ballistic nylon bottle cage • 15 function super tool with CO2 inflator • Tire levers • 8-piece patch kit • 2 threaded 16g CO2 cartridges
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
- Full UD Carbon cage - Bolts included - Rigid clamping - Lightweight - Fits 74mm bottles
Specialized's Zee Cage II Carbon incorporates a unique side-loading design that works great on small frames and full-suspension bikes with reduced clearance for bottle cages. Plus, it's made of lightweight carbon fiber so it's durable and holds bottles snugly. And, you can even choose the right- or left-hand model to make drinking as convenient as possible.
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping 5-pounds of grip force so it keeps bottles in place over even the roughest pavement.
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
This 100% FACT carbon fiber cage weighs less than 20 grams and is compatible with SWAT accessories for tool and storage integration. - SWAT technology design allows for storage and tool integration. - FACT carbon construction for a perfect fusion of strength and light weight. - Super-low bottle position improves aerodynamics. - Tuned compression design allows for secure bottle retention, with easy in/out accessibility. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Kit Storage Box (on applicable Epic, Stumpjumper HT, and Diverge models). - Weight: Less than 20g
The Reserve Rack II provides a simple, aerodynamic solution to carrying water and inflation devices. It mounts behind the saddle for enhanced aerodynamics, and if used only for water, it can hold up to two bottles with the included Rib Cage II bottle cages. And if used with Specialized's Sitero Wing, it's capable of holding one bottle and a CO2 inflation device. Say goodbye to sacrificing aero performance for the sake of carrying your essentials. - Holds one or two bottles behind the saddle in an aerodynamic position. - Can be used with Sitero Wing for carrying inflation when using one bottle cage. - Includes two Rib Cage II bottle cages.
Let Serfas’ Hero Carbon Cage save the day with its light weight and incredibly secure design. Weighing in at an astounding 16 grams, the Hero shaves previous weight off your bike while holding bottles with a reliable bottle retention design. • super lightweight carbon construction • optimized bottle retention design • fits most water bottles
Page 1 of 6 Next page